Publikationen des Department Electronic Engineering
A Review on Immune-Inspired Node Fault Detection in Wireless Sensor Networks with a Focus on the Danger Theory
Resonante ZCS Konverter mit beschränktem Arbeitsbereich
Connecting material degradation and power loss of PV modules using advanced statistical methodology
Quantifying the influence of encapsulant and backsheet composition on PV-power and electrical degradation
Advanced UV-fluorescence image analysis for early detection of PV-power degradation
Open-Source Ethernet MAC IP Cores for FPGAs: Overview and Evaluation
Simple Chargers for a Small DC Micro-Grid for a Home Emergency Power System
Quasi Resonant Zero Current Switching Modified Boost Converter (QRZCSMBC)
Universal Access Panel: A Novel Approach for Accessible Smart Homes and IoT
Boost Converter based 3-phase AC-AC Active Tracking Voltage Regulator Controlled by a Robust Hybrid Control Method
Improved positive output voltage super-lift Boost converter
Virtual three-phase laboratory exercise during pandemic situation
Single-phase Boost-type Active Tracking AC-AC Voltage Regulator with an Improved Hybrid Control Technique
Three-phase Active Tracking AC-AC Voltage Regulator based on Buck Converter with an Efficient Hybrid Control Technique
Design of State-Space Controllers with the Help of Signal Flow Graphs Shown for a Buck Converter
Third order converters with current output for driving LEDs
Feedforward Control of Quadratic Converters
An open-source wireless sensor node platform with active node-level reliability for monitoring applications
Virtual Laboratory: Switching of A Nearly Resistive Load
Programmable Logic Devices – Key Components for Today's and Tomorrow's Electronic-Based Systems
Flyback Converter with Quadratic Pre-Stage
Modified Fourth-Order Buck-Boost Converter
Converter for the Drive of two Brushed DC motors
Modified Buck-Boost Converter as DC Motor Driver with Continuous Input Current
Buck-type Single-phase AC-AC Active Tracking Voltage Regulator Controlled by an Enhanced Hybrid Control Method
ISaFe - Injecting Security Features into Constrained Embedded Firmware
Performance and Reliability Aspects of Clock Synchronization Techniques for Industrial Automation
AsTeRICS Grid – a flexible web-based application for Alternative Communication (AAC), environmental and computer control
From Hack to Elaborate Technique - A Survey on Binary Rewriting
FIJI – Fault InJection Instrumenter
A toolkit for user-centered design of assistive technology solutions
A toolkit for user-centered design of assistive technology solutions
Refined metastability characterization using a time-to-digital converter
Active Hybrid Filter Applied with a Multi-Cell Switch-Mode Power Amplifier
Boost Converter with Active Snubber Network
A Diabetes Self-Management Prototype in an AAL-Environment to Detect Remarkable Health States
Secure Control Applications in Smart Homes and Buildings
LED Converter with Limited Dutycycle
Roboter mit Himbeeren, Ein Überblick über Roboterbausätze und GPIO Bibliotheken auf Raspberry Pi (2)
Equipment for Rotating Light Radiation
Secure Control Applications in Smart Homes and Buildings
Verification challenges of complex system-on-chip devices
A Netlist-level Fault-injection Tool for FPGAs
Runtime verification of microcontroller binary code
A simple computer vision based indoor positioning system for educational micro air vehicles
Ran an den Knochen: Java embedded auf dem Beagle Bone
Source Code Plagiarism in Computer Engineering Courses
Java Embedded auf dem Beagle Bone
Improving Didactics in Computer Science - The Example of the GEMIS and the QUADRO Projects
Smart Trends in Telekommunikation und Internettechnologien
Model Checking Embedded Software of an Industrial Knitting Machine
A System-level Test for Automotive Communication Subsystems
Zukunft der Informations- und Kommunikationstechnologien und Medien: Funknetze für die Mobilität der Zukunft
Privacy in Web 2.0 Learning: Experiences with the Acceptance of Working Professional Students
A Simple, Efficient and EMI-Optimized Solar Array Inverter
Energieeffizienz in der Informations- und Kommunikationstechnik
On teaching Switched Mode Power Supplies - A Converter with Limited Duty Cycle
A novel approach to simulate Hodgkin-Huxley-like excitation with COMSOL multiphysics
Effects of functional electrical stimulation in denervated thigh muscles of paraplegic patients mapped with T2 imaging
Ein flexibler Gateway-Knoten für Netzwerke im Automobil
Towards a Systematic Test for Embedded Automotive Communication Systems
Design Considerations for Scalable High Performance Vision Systems Embedded in Industrial Print Inspection Machines
Wakeup and Startup of FlexRay Cross Linkings
Sicher gelöscht - Löschvorrichtung für Stromrichter
Implantable device for long-term electrical stimulation of denervated muscles in rabbits
Analysis of calculated electrical activation of denervated muscle fibres in the human thigh
High Efficiency DC-to-AC Power Inverter with Special DC Interface
Intrinsic Motivation of Students in Project Based Learning
Control Strategy of a Solar Inverter (Analysis of an Advances Third Order System)
A New Two-Switch DC-to-AC Converter
Magnetic Loss Measurement and Calculation of a DC/DC Converter
The Vienna functional electrical stimulation system for restoration of walking functions in spastic paraplegia
Application of the Energetic Model of Ferromagnetic Loss Calculation During Start-Up of a DC/DC Converter
A Model-Based Approach for Remote Development of Embedded Software for Object Avoidance Applications
A Model-Based Approach for Robotics Education with Emphasis on Embedded Systems
Characterization of Interconnect Fault Effects in SRAM-based FPGAs
A capacitor-free driving stage for light emitting diodes
Bitstream-Level Interconnect Fault Characterization for SRAM-based FPGAs
Quadratic Combined Forward-Flyback Converter
A new limited duty cycle step-up converter
Low-Cost Multispectral Camera Array with Image Registration
Modified Boost Converter with additional Boehringer network
High Step-Up Converter with Continuous Input and Output Current
Automatic classification of a full-thickness macular hole in optical coherence tomography images
Undervolting on wireless sensor nodes: a critical perspective
Modified d(2-d)/(1-d)2-Converter
Multisensor Avionics Architecture for BVLOS Drone Services
A New Approach to Enhance Learning Data Sets for Object Classification
UV-Fluoreszenz Bildanalyse zur frühzeitigen Detektion von PV-Leistungsdegradation
Universal Access Panel: A Novel Approach for Accessible Smart Homes and IoT
Tapped inductor Boost with exploitation of the stray energy
Two-Stage Step-up Converter with Different Voltage Transformation Ratios depending on the Duty Cycle
Cascaded control of a Buck converter designed and simulated with the help of LTSpice
Liquid and surface disinfection with pulsed UVC LEDs
Building block for a spot welder
Concept to change the voltage transformation ratio of a DC/DC converter
Three DC/DC Converters with continuous input and output current for LED applications
Controller design of a Buck converter with the help of LTSpice
Field Programmable Analog Circuits and Arrays – An Overview
Device- and Temperature Dependency of Systematic Fault Injection Results in Artix-7 and iCE40 FPGAs
A Floating Double Buck-Boost Converter as Driver for a Permanent Exited DC Machine
Converters to drive two brushed DC machines
Inverting Zero-Current-Switching Buck Converter
Modified Basic Converters in the Discontinuous Mode
Node-level indicators of soft faults in wireless sensor networks
A Family of Modified Converters with Limited Duty Cycle
Is Arduino a suitable platform for sensor nodes?
Evaluation of Open-Source Linear Algebra Libraries targeting ARM and RISC-V Architectures
Quadratic bidirectional buck-boost converter
Simple Inductive Charge Pump
Quadratic DC/DC converter with autotransformer at the output side
Quadratic Flyback Converter
SoK: A Taxonomy for Anomaly Detection in Wireless Sensor Networks focused on Node-level Techniques
Survey and Comparison of Digital Logic Simulators
Open-Source RISC-V Processor IP Cores for FPGAs – Overview and Evaluation
Checking Application-level Properties Using Assertion Synthesis
Innovative Plattformen für Elektronische Systeme (INES)
Open-Source Crypto IP Cores for FPGAs - Overview and Evaluation
Evaluation of Open-Source Linear Algebra Libraries in Embedded Applications
Reliability-Enhanced High-Level Synthesis using Memory Profiling and Fault Injection
Four quadratic DC/DC converters with one low-side switch and a tapped inductor at the input side
Zero-Current-Switching Buck Converter
Zero-Current-Switching Boost Converter, Power Conversion and Intelligent Motion
A family of quadratic DC/DC converters with one low-side switch and a tapped inductor at the output side
A Model Railway based Demonstrator for Saftey-Critical Systems
Evaluation of Libraries and Typical Embedded Systems for ECDSA Signature Verification for Car2X Communication
Eventroms in IEC 61499 Applications
Development of a Signal-Toolkit to Increase the Availability of Measurement Equipment at Courses Dedicated to Technical Sciences
Using a Duplex Time-to-Digital Converter for Metastability Characterization of an FPGA
Active Hybrid Filter Applied with a Multi-Cell Switch-Mode Power Amplifier
Development of a Signal Generator for Study Programs Dedicated to Electronic Engineering
Modified Basic DC-DC Converters
Preliminary Evaluation of High-level Synthesis Tools - Xilinx Vivado and PandA Bambu
Energy-Efficient Real-Time Operating Systems: An Approach using Dynamic Frequency Scaling and Worst-Case Execution Time Aware Scheduling
Contour Extraction and Compression Scheme Utilizing Both the Transform and Spatial Image Domains
Application of Enhanced Hadamard Error Correcting Code in Video-Watermarking and his comparison to Reed-Salomon Code
Development of a low-cost, open-source measurement equipment for undergraduate courses dedicated to embedded systems
Integration of Static Worst-Case Execution Time & Stack Usage Analysis for Embedded Systems Software in a Cloud-Based Development Environment
Methods for Protection of Iintellectual Property in Embedded Software - A Survey
A Binary Protection Framework for Embedded Systems Software
Personalized Computer Access for People with Severe Motor Disabilities - AsTeRICS, FlipMouse and the Two-Level Personalization Software Engineering Method
A Step-Down Converter with High Down-Scale Ratio
Current Measurement Device for High and Fast Changing Currents
Hybrid Filter for a Multi-Cell Switch-Mode Power Amplifier
Concept to Reduce the Ringing During the Discontinuous Mode of a DC/DC Converter
Increasing the accessibility of measurement equipment for undergraduate courses dedicated to Embedded Systems
Adding Channel Security to a Fingerprint Verification Chain
HLShield: A Reliability Enhancement Framework for High-Level Synthesis
A FPGA-based Demonstrator for Safety-Critical Applications
Gender-inclusive laboratory design for teaching electric vehicle components
Vulnerability Analysis of Storage Elements in HLS-Generated Designs using High-Level Profiling
Complementing Testing of IEC61499 Function Blocks with Model-Checking
An Efficient Control Approach for DC-DC Buck-Boost Converter
Thermo-Puncture Devices - Mechanical and Electrical Concepts
Fault Injection for IEC 61499 Applications
Static Worst-Case Execution Time Analysis Tool Development for Embedded Systems Software
Synchronizing an IEEE 1588 Slave Clock Over Both Paths of a Redundant Ethernet System
Software security requirements in building automation
A Runtime Middleware for Enabling Application Integration and Rapid Re-Engineering
FLipMouse - a Flexible Alternative Input Solution for People with Severe Motor Restrictions
Implementation of a clothoid based trajectory into the ROS framework
Wireless Power as a Charging Concept for Light Electric Vehicles: Technological Hype or a Real Solution
An Algorithm to Evaluate and Build Schedules for a Distributed Sensor System with Respect to Clock Synchronization
A Cloud-Based Approach to Development of Embedded Systems Software
Deadlock Detection Runtime Service for Embedded Linux
Software Based Methods to Harden Embedded Software at Run-Time: A Survey
An Enhanced Multidimensional Hadamard Error Correcting Code and his Application in Video-Watermarking
Online Offset Correction of Remote Eye Tracking Data: A Novel Approach for Accurate Gaze-Based Mouse Cursor Control
R2U2: Monitoring and Diagnosis of Security Threats for Unmanned Aerial Systems
High Dynamic Current Source for LED Light and Data Transmission Applications
Active Mains Filters with Combined Feed-Forward and Feed-Back Control
Perception of Task Complexity by Teachers and Students
Logic Synthesis of Assertions for Saftey-critical Applications
A Common Platform for Bridging Pre-and Post-Silicon Verification in Mixed-Signal Designs,
Synchronization Approaches for Testing Mixed-Signal SoCs under Real-Time Constraints using On-Chip Capabilities
Augmenting Pre-Silicon Simulation by embedding a Scripting Language in a SystemC Environment
A Log-Tool Suite for Embedded Systems
Entwicklung eines flexibel in der Lehre einsetzbaren Designflows für digitale Mikrochips
Considerations on Teaching Digital ASIC Design
Memory Leak Detection Runtime-Service for Embedded Linux Devices
Runtime Verification Infrastructure for Embedded Linux
A Cloud-based Integrated Development Environment for Embedded Systems
Identifying Unsecured Building Automation Installations
Spotting Unsecured KNX Installations
The AsTeRICS Academy for Cross-Cultural Education in Assistive Technologies, Strategies for fostering diversity in electrical engineering and information technology
Problems and solutions for refitting a sensor network with IEEE1588 clock synchronisation
Application of Existing Wireless Power Transfer Standards in Automotive Applications,
On Automated Generation of Checker Units from Hardware Assertion Languages
A Low-cost Sound Generator for an Electric Quad Bike
Die Rolle von Aufgaben in der technischen hochschulischen Lehre
Experimental Assessment of the Clique Problem in FlexRay
Large scale integration and evaluation of aal technologies in eastern austria - the modulaar project
Ambient Assitive Technologies: The mobile robot P3AAT
Model-based Design of Novel Human-Computer Interfaces, The Assistive Technology Rapid Integration and Construction Set (AsTeRICS)
EMBEDDED MULTI CORE VIRTUAL PROTOTYPING FOR SOFTWARE ENGINEERS
A simple computer vision based indoor positioning system for educational micro air vehicles
Innovative concepts for Embedded Systems courses
Will E-Learning Become the Predominant Method of Teaching at Universities? Experiences with Different Forms of Teaching
Source Code Plagiarism in Computer Engineering Courses
Design & development of a prototype android app for a KNX home
ANT goes KNX - an open platform gateway for ANT and KNX
Energy and Communication Access Networks — Bridging the Divide: Approaches for Policy Intervention
Smart Emergency : ein Konzept für die Versorgung von kritischer Infrastruktur Proceedings
Addressing accessibility challenges of people with motor disabilities by means of AsTeRICS: A step by step definition of technical requirements
Making the PlayStation 3 Accessible with AsTeRICS
Electro-Foot-Reflexology Stimulator
Object Detection and Measurement using Stereo Images
AsTeRICS A Flexible Prototyping Environment for Hybrid BCI Applications in End User Environments
A two stage approach for a cost-effective and versatile debugging unit and starter platform
A Framework for Teaching Embedded Multi-Core Programming
Increasing the attractivity of embedded system courses
Evaluating best practices for teaching multi-core programming
University education in transition – which technical support is needed by part-time students
AsTeRICS, a Flexible Assistive Technology Construction Set
New approaches for a distance learning course about Embedded,
A methodology for remote debug, test and maintenance based on IEEE1588
AsTeRICS - Towards a Rapid Integration Construction Set for Assistive Technologies
Vision for Assistive Technologies
A Flexible Sensor-mat to Automate the Process of People Counting
Past Time LTL Runtime Verification for Microcontroller Binary Code
Hardware Support for Efficient Testing of Embedded Software
Testing Microcontroller Software Simulators
Dedicated Infrastructure for academic courses related to embedded systems design supporting students in distance learnign programs
A micro air vehicle instrument landing system based on synchronized, unidirectional ultrasound transmission
Reducing the entrance hurdle in Embedded System Engineering courses
AsTeRICS: Assistive Technology for All
AsTeRICS - A Rapid Prototyping Platform for Assistive Technologies
Experimentelle Implementierung eines Switches für FlexRay
Privacy in Web 2.0 Lerning - Experiences with the Acceptance of Working Professional Students
The QUADRO Project - Integration E-Learning Elements with Social Networks to Simplify the Daily Life of IT-Students
FlexiCount: Eine flexible Personenzählmatte für den mobilen Indoor und Outdoor Einsatz
A Simple Two-Quadrant DC Motor Controller
How to Convert a Traditional Course in Programming into an Online Course
GEMIS and QUADRO - Two Projects to Improve Didactics in Computer Science
Can undergraduate students be integrated into large research projects?
System-Testumgebung für die verteilte Automobilelektronik
An Approach for Generating Semantic Annotations in Telecommunication Services
Test-Case Generation for Embedded Binary Code Using Abstract Interpretation
Development of an Embedded Monitoring Device for a Manufacturing Plant
Formale Verifikation von Embedded Systems Software
A Simple Cuk Converter Derivated Two-Quadrant DC Motor Controller
Experiences using autonomous model airplanes for embedded control education and for bachelor and diploma projects
Combined Forward-Flyback-Converter with only two Diodes
Mobile Augumented Barcodes: experiences with a novel mobile barcode scanner in the wild
Ausgelagerte Uhrensynchronisation für verteilte eingebettete Systeme
Audio Files for Mobile Devices - A Valuable Method for Teaching?
Towards a numerical 3D model of Functional Electrical Stimulation of denervated, degenerated human skeletal muscle
Coupling Effects in the Bidomain Model of Functional Electrical Stimulation
Refining Assembly Code Static Analysis for the Intel MCS-51 Microcontroller
Weltweit kleinste, voll integrierte Lösung zur Uhrensynchronisation nach IEEE 1588 auf Schicht 2
Remote LAB infrastructure for Distance Learning Courses at the Undergraduate Level in Embedded Systems Design
On-chip Hardware Support for a Radically New Approach to Coordinated Debug of Networked Embedded Systems
Evaluation of an Esterel-based Hardware/Software Co-Design Flow
Basic Linear-Mode Solar-Cell Simulators
A Test Suite for System Tests of Distributed Automotive Electronics,
Using 3-valued Memory Representation for State Space Reduction in Embedded Assembly Code Model Checking
Model Checking Assembly Code of an Industrial Knitting Machine
Comparison of a New Combined Four-Diode Forward-Flyback Converter with the Classical Forward Converter
Minimization of the Fundamental Harmonic of the Total Switch Current in Multiple Buck Converter Structures
Koordinierte Fehlersuche und Tests in verteilten Echtzeitsystemen
Stack Bounds Analysis for Microcontroller Assembly Code
Is the Performance of Traditional Teaching being Improved by the Use of Audio Files for Mobile Learning?
Nicht-intrusive Uhrensynchronisation nach IEEE 1588 für verteilte, eingebettete Systeme via IEEE 802.3/Ethernet
Background IEEE 1588 Clock Synchronization over IEEE 802.3/Ethernet, ISPCS 2008
Development of a Flexible Gateway Platform for Automotive Networks
Development of a Data Collection Platform
Automated Generation of Explicit Connectors for Component Based Hardware/Software Interaction in Embedded Real-Time Systems
hallenges in Embedded Model Checking - A Simulator for the [mc]square Model Checker
Anwendung eines Benchmark-Frameworks für komponentenbasierte Software eingebetteter Systeme
Motivating Model Checking of Embedded Systems Software
Automated Testing of FlexRay Clusters for System Inconsistencies in Automotive Networks
An Investigation of the Clique Problem in FlexRay
Neue Testlösungen für die Automobilelektronik
Analysis of a device for converting a unipolar input voltage into two symmetric bi-directional output voltages with a magnetically coupled coil
Integrated Real-Time Data Access and Monitoring System for Hydrological Investigations and Water Resources Management
Quality Surveillance of Hydrological Data by an Online Monitoring System
Fahrzeuge ohne Elektronikpannen - Fehlersuche in Echtzeitsystemen: Ein Fallbeispiel
Analysis and Control of a Bidirectional Two-Stage Boost Converter
Simulation of a battery powered air conditioning system with Modelica
Informationstagung Mikroelektronik 2008
Efficiency Optimized, EMI-Reduced Solar Inverter Power Stage
An innovative combination of non-traditional teaching methods for learning in small groups
Personal PBL Experiences with Theoretical Computer Science Lectures
User centered design in software projects - can it be taught?
The acceptance of eLearning methods of extra occupational and full-time students
Performance Benchmark of DSP and FPGA Implementations of Low-Level Vision Algorithms
Optimization and Benchmark of Vision Algorithms on a DSP
Efficient Matrix Organisation Of A University
Development of modeling functional electrical stimulation in denervated muscle
Concepts and Tools for the Test of the Communication Sub-System of Time-Triggered Distributed Embedded Systems
Modeling Component Based Distributed Embedded Systems Application with Explicit Connectors in UML 2.0
Boost converter for low step-up ratio with tapped inductor and reduced voltage stress acrosse the buffer capacitor
Explicit Connectors in Component Based Software Engineering for Distributed Embedded Systems
A Component Model for the AUTOSAR Virtual Function Bus
Refactoring an Automotive Embedded Software Stack using the Component-Based Paradigm
A Test Tool for FlexRay-based Embedded Systems
Komponentenbasierte Systemsoftware für die Automobilelektronik
A Unified Benchmarking Process for Components in Automotive Embedded Systems Software
New Methods including Picture Processing for Hydro-Meteorological On-Line Data Acquisition
Teaching in Project Based Learning Environments and the Role of Intrinsic vs. Extrinsic Motivation
Synthesizing Communication Middleware from Explicit Connectors in Component Based Distributed Architectures
Efficient Matrix Organisation of a University
Remote Quality Monitoring of On-Line Measurements For Hydrological Investigations
DC-to-DC Converter Simulation Applied to a Modified Boost Converter
TACKLING THE ABSTRACTION GAP FOR THE DESIGN OF EMBEDDED REACTIVE SYSTEMS USING ESTEREL - A CASE STUDY
Building Component Based Software Connectors for Communication Middleware in Distributed Embedded Systems
Modeling a Synchronous Generator with Real-Time Hardware
Integrating undergraduate project based learning in Computer Science with COAST: A research network
Modellierung reaktiver Systeme mit Esterel
Entwicklung eines Satellitenmodems
Evaluierung eines Esterel-basierenden Hardware/Software Co-Design Flows
Hochgeschwindigkeitskamera mit intelligenter Datenvorverarbeitung
How Students Teach Robots to Think - The Example of the Vienna Cubes a Robot Soccer Team
From Teaching to Learning - An Innovative Approach to Engineering Education
Simulation der elektrischen Stimulation im menschlichen Oberschenkel mit Hilfe von FEMLAB
Analysis of a boost converter with tapped inductor and reduced voltage stress across the buffer capacitor
Architecture for Hardware-driven Image Inspection based on FPGAs
A Heterogenous Hardware-Software Co-Simulation Environment Using User Mode Linux and Clock Suppression
Automatic Parameter Identification in FlexRay based Automotive Communication Networks
An Efficient Test and Diganosis Environment for Communication Controllers
Wechselrichterkippen in netzgeführten Stromrichterschaltungen bei Netzspannungs-Ausfall oder Netzspannungs-Einbruch und Abhilfe durch eine Löschvorrichtung
A new Step-Up Converter with Reduced Voltage Stress Across the Buffer Capacitor
Model Level Validation of Component Based Software for Distributed Embedded Systems
DC-to-DC Solar converter with Controlled Active Clamping System
Accelerating RTL Simulation by Several Orders of Magnitude Using Clock Suppression
Hardware Implementation of a Transform Coding Stage for a Video Decoder
Handle Team Changes in Student Projects - the Example of the Vienna Cubes
A Structured Approach for the Systematic Test of Embedded Automotive Communication Systems
The Way to Bologna with the Bachelor-Master System - New Challenges for Vocational Education in Austria
A Switch for Automotive Application
A Generic Tool for Systematic Tests in Embedded Automotive Communication Systems
Efficient Stimulus Generation for Remote Testing of Distributed Systems - The FlexRay Example
A Flexible Hardware Architecture for Fast Access on Large Non-Volatile Memories
A Method for Bit Level Test and Diagnosis of Communication Services
Bidirectional DC-DC Half-Bridge Converter with the Possibility of Zero-Voltage Switching and Reduced Current Stress of the Inductors
Device for Avoiding the Destructive Effects of Commutation Failures on Line Commutated Converters
Analyzes of a Bidirectional DC-DC Half-Bridge converter with Zero-Voltage Switching
An Automotive Hybrid Switch
High Efficiency DC-to-AC Power Inverter
Network- and Internet Integration of Embedded Systems
Design of Master Degree Programs to Meet Todays Business Needs
Managing large projects with changing students – the example of the roboter soccer team “Vienna Cubes"
Functional electrical stimulation of denervated skeletal muscle fibers in 3D human thigh-modeling and simulation
Hybrid Switching of High Currents in the Vicinity of the Zero Crossing of the Supply Voltage
A Monitoring concept for an Automotive Distributed Network - The Flexray Example
Design Trade-Offs for Systematic Tests of Embedded Communication Systems
An FPGA based SoC Design for Testing Embedded Automotive Communication Systems employing the FlexRay Protocol
A Layer Model for the Systematic Test of Time-Triggered Automotive Communication Systems
Monitoring and Fault-Injection of X-by-Wire Communication Networks
EGNOS and LEO for Telematics Applications in the Inland Waterway Segment – Project MUTIS
A Hybrid Synchronous Switching Device
Bi-directional DC-to-DC converter for solar battery backup applications
Optimized DC-to-AC Power Inverter for Power Grid Operation
The European Project RISE: General Overview and Engineering Aspects
Saturation of the M-Wave Amplitude with Increasing Stimulation Amplitude
An Interdisciplinary Approach in Educating Future Leaders in a Rapidly Growing European Union
New Architecture and didactics for study programmes in a growing European Union
Intrinsic motivation of students – the role of proper course design in education for sustainability
Intrinsic Motivation of Students in PBL Courses
Functional electrical stimulation of denervated skeletal muscles: a modeling study
Simulation and Analysis of Electric Activation of Denervated Muscle Fibres in the Human Thigh
μC/OS-II Flashportierung für SK167
Flux measurements and modeling of the magnetic hysteresis for a zero-voltage switching dc-to-dc converter
Low-Cost „Near Online“ Yacht Monitoring Using Leo-Satellite Transmission
Simple DC-to-DC Converters with the Possibility of Bipolar Input Voltage
High Efficiency Multi Stage/Level Solar Converters
Development of Curricula for Vocational Training in Electronics Engineering at Technikum wien
Improved 1 kW solar inverter with wide input range
μC/OS-II Echtzeitbetriebssystem für Mikrocontroller
Internetintegration von Embedded Systems
The BioSignalizer Software for Experimental Work on Functional Electrostimulation of Long-Term Denervated Rabbit Muscle
How to Motivate Students in Project Based Learning
Project Based Learning and the Intrinsic Motivation of Students
Low-Cost Daten- und Positionsübertragung mittels LEO – Satelliten
Application of the Energetic Model of Ferromagnetic Hysteresis to Bidirectional DC-to-DC Converters with High Input to Output Voltage Ratio
Control Strategy of a Solar Inverter (Analysis of a Seventh Order System II)
DC-to-DC Solar Battery Converter for Paralleled Operation in Multi-Source Structures
Control Strategy of a Solar Inverter (Analysis of an Advances Third Order System)
Control Strategy of a Solar Inverter (Analysis of a Fifth Order System III)
A New Two-Switch DC-to-AC Converter
A Hybrid Switching System for Test Applications
Control Strategy of a Solar Inverter (Analysis of a Fifth Order System II)
Magnetic Loss Measurement During Start-Up of a DC/DC-Converter
Disturbance-Free Current Acquisition for Photovoltaic Converters
Entwicklung von Organisationsstrukturen an FHs in Österreich
Pan-European "Near Online“ Vessel Tracking on Inland Waterways using LEO-Satellite Retransmission
A Simple DC-to-DC Converter with the Possibility of Bipolar Output
"Near Online“ Vessel Tracking on European Waterways Combining GPS and LEO-Satellite Transmission
Magnetic Hysterese Modelling of Electronic Components
Control Strategy of a Solar Inverter (Analysis of a Fifth Order System III)
BioSignalizer: Data acquisition and analysis for experimental and clinical applications
How to motivate Students in Project Based Learning
On Modelling and Simulation of Electric Rolling Stock Drives
Control Strategy of a Solar Power Converter (Analysis of a Seventh Order System)
Energetic Model of Ferromagnetic Hysteresis Applied to ZETA Converter
Control Strategy of a Solar Power Converter (Analysis of a Fifth Order System)
Bidirectional DC-to-DC Converter with Wide Input to Output Voltage Ratio
A New Fourth Order DC-to-AC Converter
Control Strategy of a Solar Power Converter (Analysis of a Third Order System)
Low Voltage DC-to-DC Converter with Wide Input to Output Voltage Ratio
Bidirectional DC-to-DC Converter in Solar Battery Applications
On Teaching Power Supplies - A Converter with Limited Duty Cycle
A Special Bidirectional Step-Up and Inverting Step-Up/Down Converter
Object oriented Software Components for Multichannel-Stimulator Control
BioSignalizer -A Class Library for Acquisition, Analysis, Display, and Management of Biosignals in Clinical and Experimental Research
Computer Controlled Intraoperative Electroneurodiagnostics
Application of Functional Electrical Stimulation (FES) for training in Long-Term Space Flights
Automated Estimation of Stimulation Threshold using Single Twitches and Acceleration Sensors
Biphasic Stimulation: An Alternative Approach to Minimize the Stimulus Artifact for Diagnostic and for Control Applications
FES as a Countermeasure against Muscular Atrophy in Long-Term Space Flights
Mobile PC-System for Intraoperative Electroneurodiagnostics
A Computerized System for Control, Data Aquisition and Online Analyses of Biosignals
The Vienna FES system for restoration of walking functions in spastic paraplegia
Magnetic Measurement and Modelling of a Dc-DC Converter Start-Up
Low Loss Converters with High Step-Up Conversion Ratio Working at the Border Between Continuous and Discontinuous Mode
Improved Wide Input Voltage Range 1kW Solar Inverter
High Efficiency Multiphase DC to AC Inverter
Sensor Node Fault Detection in Wireless Sensor Networks: An Immune-inspired Approach
Secure Control Applications in Smart Homes and Buildings
Secure Control Applications in Smart Homes and Buildings
Unterstützungstechnologien in Smart Homes: kostengünstig & praxisnah
Using a Duplex Time-to-Digital Converter for Metastability Characterization of an FPGA
Development of a Signal-Toolkit to Increase the Availability of Measurement Equipment at Courses Dedicated to Technical Sciences
Evaluation of Libraries and Typical Embedded Systems for ECDSA Signature Verification for Car2X Communication
Development of a Signal Generator for Study Programs Dedicated to Electronic Engineering
Active Hybrid Filter Applied with a Multi-Cell Switch-Mode Power Amplifier
DC-DC Converters - Non-Conventional Topologies and Applications
Modified Basic DC-DC Converters
Preliminary Evaluation of High-level Synthesis Tools - Xilinx Vivado and PandA Bambu
Application of Enhanced Hadamard Error Correcting Code in Video-Watermarking and his comparison to Reed-Salomon Code
Personalized Computer Access for People with Severe Motor Disabilities - AsTeRICS, FlipMouse and the Two-Level Personalization Software Engineering Method
AsTeRICS und FlipMouse: Flexible Eingabesysteme und kostengünstige Lösungen für Kommunikation und Umgebungssteuerung für Menschen mit Behinderung
Contour Extraction and Compression Scheme Utilizing Both the Transform and Spatial Image Domains
Hybrid Filter for a Multi-Cell Switch-Mode Power Amplifier
A Binary Protection Framework for Embedded Systems Software
Concept to Reduce the Ringing During the Discontinuous Mode of a DC/DC Converter
Current Measurement Device for High and Fast Changing Currents
Gender-inclusive laboratory design for teaching electric vehicle components
Complementing Testing of IEC61499 Function Blocks with Model-Checking
Software security requirements in building automation
Thermo-Puncture Devices - Mechanical and Electrical Concepts
Fault Injection for IEC 61499 Applications
Static Worst-Case Execution Time Analysis Tool Development for Embedded Systems Software
A Diabetes Self-Management Prototype in an AAL-Environment to Detect Remarkable Health States
KNX in academic education and training
KNX security devices
A Runtime Middleware for Enabling Application Integration and Rapid Re-Engineering
FLipMouse - a Flexible Alternative Input Solution for People with Severe Motor Restrictions
Synchronizing an IEEE 1588 Slave Clock Over Both Paths of a Redundant Ethernet System
Impulsvortrag zum Thema „Smart Homes/Active Assisted Living“
Implementation of a clothoid based trajectory into the ROS framework
Wireless Power as a Charging Concept for Light Electric Vehicles: Technological Hype or a Real Solution
AsTeRICS Framework
An Algorithm to Evaluate and Build Schedules for a Distributed Sensor System with Respect to Clock Synchronization
Perception of Task Complexity by Teachers and Students
Deadlock Detection Runtime Service for Embedded Linux
Online Offset Correction of Remote Eye Tracking Data: A Novel Approach for Accurate Gaze-Based Mouse Cursor Control
An Enhanced Multidimensional Hadamard Error Correcting Code and his Application in Video-Watermarking
High Dynamic Current Source for LED Light and Data Transmission Applications
Active Mains Filters with Combined Feed-Forward and Feed-Back Control
R2U2: Monitoring and Diagnosis of Security Threats for Unmanned Aerial Systems
Equipment for Rotating Light Radiation
Logic Synthesis of Assertions for Saftey-critical Applications
A Common Platform for Bridging Pre-and Post-Silicon Verification in Mixed-Signal Designs,
Augmenting Pre-Silicon Simulation by embedding a Scripting Language in a SystemC Environment
Synchronization Approaches for Testing Mixed-Signal SoCs under Real-Time Constraints using On-Chip Capabilities
Considerations on Teaching Digital ASIC Design
A Log-Tool Suite for Embedded Systems
A Cloud-based Integrated Development Environment for Embedded Systems
Security in Smart Homes and Buildings
Problems and solutions for refitting a sensor network with IEEE1588 clock synchronisation
Die Rolle von Aufgaben in der technischen hochschulischen Lehre
Reverse Engineering von Smart Phone Applications
Will E-Learning Become the Predominant Method of Teaching at Universities? Experiences with Different Forms of Teaching
Energy and Communication Access Networks: Bridging the Divide
Sicherheitsrisiken für Unternehmen durch Reverse Engineering und Modifikation von Android Apps
Alles smart: Phones, Homes, Grids & Cities.Der Siegeszug der intelligenten Technik
Analyse von Android Apps
Reverse Engineering, Forensik und Repackaging von Android Apps
Smart Emergency - Ein Konzept für die Versorgung von Kritischer Infrastruktur
Internet of Energy - die Glasfaser als Enabler für Smart Grids
Smart Emergency: flexible Stromversorgung für Ausnahmesituationen
Security Gefahren durch Reverse Engineering von Apps Autoren
Konvergenz von intelligenten Energie- und Telekommunikationsnetzen
Smart Trends in Telecommunications & Internet Technologies
Informations- und Kommunikationstechnologien in der Energiewirtschaft
GEMIS and QUADRO - Two Projects to Improve Didactics in Computer Science
How to Convert a Traditional Course in Programming into an Online Course
Smart phone application for real-time optimization of rower movements
An Approach for Generating Semantic Annotations in Telecommunication Services
Wandel im Strombedarf für den IKT-Betrieb. „Achillesferse“ der Informationsgesellschaft
Mobile Augumented Barcodes: experiences with a novel mobile barcode scanner in the wild
Smart Phone Applications for User Centric Energy Management Systems
Identity Management in Cyberspace
Identitätsmanagement im Cyberspace
Using Smart Phones in Desaster Management
Audio Files for Mobile Devices - A Valuable Method for Teaching?
Mobile Marketing und Advertising - strategische Ansätze und Wertschöpfungskette
Influence of the electrode position on the electrical field distribution and excitation of a denervated muscle fiber
Integrated Real-Time Data Access and Monitoring System for Hydrological Investigations and Water Resources Management
Fixed Mobile Convergence Services on Smart Phones
Telco 2.0 & Fixed Mobile Convergence Services
Fixed Mobile Convergence Service
eHealth und eCard an der Fachhochschule Technikum Wien
Do Competitions between Teams in Self-Directed Learning Increase the Performance of Students?
Are Human Factors the More Important Factor for the Success of Project-Based Learning?
An innovative combination of non-traditional teaching methods for learning in small groups
University of Applied Sciences - Technikum Wien, Austria: Should Computer Science Students Use Their Own Laptop Computers in Project Based Learning?
New Methods including Picture Processing for Hydro-Meteorological On-Line Data Acquisition
Remote Quality Monitoring of On-Line Measurements For Hydrological Investigations
Integrating undergraduate project based learning in Computer Science with COAST: A research network
A Set of Consecutive Courses in Business Informatics to help IT Professionals being Successful
Simulation der elektrischen Stimulation im menschlichen Oberschenkel mit Hilfe von FEMLAB
FE-Modellierung für Implantate als Alternative zur transkutanen Elektrostimulation des langzeitdenervierten Oberschenkels
From Teaching to Learning - An Innovative Approach to Engineering Education
Fachhochschule Technikum Wien - Fernlab in der Lehre
Analysis of calculated electrical activation of denervated muscle fibres in the human thigh
EGNOS and LEO for Telematics Applications in the Inland Waterway Segment – Project MUTIS
Analyse der Aktivierung von denervierten Muskelfasern im menschlichen Oberschenkel bei FES
Simulation der Funktioniellen Elektrostimulation an der denervierten Oberschenkelmuskulatur
Low-Cost „Near Online“ Yacht Monitoring Using Leo-Satellite Transmission
Didaktik für das Wissenszeitalter
"Near Online“ Vessel Tracking on European Waterways Combining GPS and LEO-Satellite Transmission
Pan-European "Near Online“ Vessel Tracking on Inland Waterways using LEO-Satellite Retransmission
Low-Cost Daten- und Positionsübertragung mittels LEO – Satelliten
Junge Perspektiven für mobile Kommunikation
Junge Perspektiven für mobile Kommunikation
FlexRay (Chapter 44)
New Role Models for IT-Students to Improve their Motivation to Learn
Kollaboratives Forschen und Lernen mit dem Web 2.0 zur Senkung der Dropout-Rate
The Effect of Subharmonic Stimuli on Singing Voices
Intrinsic Motivation and Education for Sustainability
Organisationsmodelle von Fachhochschulen und fachhochschulischen Institutionen
Problem und Project Based Learning an der Fachhochschule Technikum Wien
Automatisierte Datenerfassung zur Bestimmung optimaler FES Parameter